The F142-F143 set is usually used to form seams over 1/2" high. Tightness of the seam is controlled by shimming under the adjustable anvil.
Please type your preferred length: ft
Flame Hardening:
Yes
No
F144-F145 and F146-F147
Double-flange standing seams are formed in the F144-F145 and F146-F147 sets in two operations. The first operation is performed in die set F144-F145 and the closing operation in die set F146-F147. Die sets can be produced with matched shut heights for progressive forming if the press brake has sufficient length.
Please type your preferred length: ft
Flame Hardening:
Yes
No
F148-F149
The F148-F149 set is used to form a standing seam in two operations. The top station forms an acute angle offset, which is subsequently closed at the lower level.
Please type your preferred length: ft
Flame Hardening:
Yes
No
F152-F153
A standing seam can be made with the F152-F153 set. The acute angle is subsequently flattened in another die and operation.
