Open-angle offsets up to 5/16" can be produced using the F82-F83 set. Shimming behind reversible blocks changes the depth of the offset. Rotation of the blocks changes the radius. Each corner has a different radius to allow for various material thicknesses.
Please type your preferred length: ft
Flame Hardening:
Yes
No
F84-F85
If the offset is 1" or less from the edge, the F84-F85 set can be used. This die set has a back-up leader to minimize spreading, resulting in sharper offsets.
Please type your preferred length: ft
Flame Hardening:
Yes
No
F86-F87
Material-thickness offsets are performed on the F86-F87 set. When necessary, a back-up leader and gauging are provided.
Please type your preferred length: ft
Flame Hardening:
Yes
No
F88-F89
On heavier gauge stock, material-thickness offsets will always be of the open-angle form similar to F88-F89 because the outside radii are too large for the depth of the form.
